Dissolving Aluminium Chloride in Water

Dissolving Aluminium Chloride in Water A controlled variable is a variable that stays the same throughout an experiment such as: adding a specific amount of water to test tubes filled with different amounts of ammonium chloride. An independent variable is the variable that is changed during an experiment, e.g. different amounts of ammonium chloride added to separate test tubes in an experiment. A dependant variable is a variable that changes because of the independent variable, e.g. the difference of temperatures when the first crystals begin forming in the separate test tubes filled with different amounts of ammonium chloride. In this experiment the controlled variable will be 10mL of water that is added to each test tube filled with ammonium chloride. The independent variable will be the different amounts of ammonium chloride put into each test tube. The dependant variable will be the temperature of the first crystals appearing in the test tubes filled with different amounts of ammonium chloride that are dissolved in water. Ammonium Chloride Ammonium chloride is a substance which has the molecular formula NH‚„Cl and is highly soluble in water. It was first manufactured during the 13th century in Egypt and Europe and was originally known as sal ammoniac. It is used for a variety of purposes. In medicine it is used as an expectorant, which clears the phlegm from the bronchi, lungs and trachea area. It is also used as a component in dry cell batteries, an ingredient in cough medicine and as a dietary supplement to maintain pH levels. (See http://www.wisegeek.com/what-is-ammonium-chloride.htm . Last Updated March 13th 2013.) Solubility Solubility is when a substance is dissolved in a solvent such as water. This is then measured in g/100mL to calculate the solubility of that substance in the solvent, e.g. The solubility of 50g of Ammonium chloride would be shown as 50g/100mL of water. Solubility is a method used to calculate how much of a substance can be dissolved in a solvent. This method can be explained in three different ways: a saturated solution, an unsaturated solution and a supersaturated solution. (See also: Study on Chemistry 1, page 295-96.) A saturated solution is where no more solute can dissolve in the solvent at a specific temperature.  [1]  An unsaturated solution is where more solute can be added to dissolve in the solvent at a specific temperature.  [2]  However, a supersaturated solution is where an unexpected amount of solute can still be dissolved in a solvent at a specific temperature. A supersaturated solution can only be achieved (with difficulty) by changing the conditions of the saturated solution.  [3]   In this experiment, the substance is Ammonium chloride and the solvent is water and when mixed together, the Ammonium chloride dissolves. Repeating this with different amounts of ammonium chloride gives us the solubility of Ammonium chloride in g/100mL of water. When adding more ammonium chloride, the max amount of the substance that can dissolve in the solvent is discovered, this is called a saturated solution. If a specific amount of ammonium chloride that always dissolves in g/100mL of water is used, it is called an unsaturated solution because more of the substance can be added to the solvent, to dissolve. If the saturated solution of the substance is reached but more of the substance is added and surprisingly dissolves in the solvent, it is called a supersaturated solution. This experiment can consist of a saturated or an unsaturated solution because the solubility of Ammonium chloride in water is unknown. (See also: URLs displayed in bibliography with a * next to it) Solubility Curve Solubility curve is a graph of solubility vs temperature. Solubility curves are used to predict the maximum amount of a substance that can be dissolved in a solvent at a specific temperature. Solvents A solvent is a substance that is either a liquid, solid or gas that dissolves a solute to create a solution. The maximum amount of a substance that any solvent can dissolve depends on the temperature of the solvent, e.g. If water can dissolve a maximum of 30g of ammonium chloride at 50 °C, but the temperature was increased to 60 °C it could dissolve more of the ammonium chloride. There are two categories of solvents: polar and non-polar solvents. A polar molecule has two sides; one is positive and the other negative, also known as a dipolar molecule. Polar molecules have polar bonds, though some can have polar bonds but are non-polar molecules. This is because the polar bonds are arranged in a way that they cancel each other out. The overall polarity of a molecule depends on the direction of the bond dipoles in a molecule which is determined by the shape of the molecule. Polar solvents can have a small electrical charge because of the shape of the compound. A compound such as water has the hydrogen atoms at opposite angles of the oxygen atom. The hydrogen atoms can create a small electrical charge because of the direction of the bond dipoles, which is determined by the shape of the hydrogen atom. A molecule may mix in a polar solvent if it has a polarity of its own. Salt and sugar both dissolve in water easily because their molecules are attracted to the small electrical charges of water. Non-polar solvents dont have an electrical charge and cannot mix with a polar solvent. Polar and non-polar solvents use a dielectric constant to provide a rough measure of the solvents polarity. Dielectric constants are the electrical properties of a solvent using a capacitor, in which electrical currents pass through. Non-polar solvents are considered to have a dielectric constant of less than 15. The polarity index measures the ability of a solvent to dissolve different polar materials. The results of both these tests are used in a table of common solvents and in future can be used for identifying solvents in chemical processes. (See also: http://www.wisegeek.com/what-is-a-polar-solvent.htm : Last Updated: 14th March 2013.) (See also: http://www.erowid.org/archive/rhodium/pdf/solvent.miscibility.pdf : Last Updated 14th March 2013.) Polar and non polar solvents are related to this experiment because water is a polar solvent and ammonium chloride is a polar solute. This means that the two can mix together. If either one was a non-polar solvent or solute, they wouldnt mix because they dont have a positive or negative pole that binds them together. Endothermic Reactions An endothermic reaction is where a product absorbs energy from its surroundings, causing its surroundings to drop in temperature. In an exothermic chemical reaction the reactants have more energy than the products. However, in an endothermic chemical reaction the products have more energy than the reactants because it absorbs the energy from the reactants and the environment. If ammonium chloride is added in a beaker filled with water and dissolved, the beaker would become cold. This is because it is an endothermic reaction, where the ammonium chloride absorbs the energy from the solvent (water) and its surroundings. This is why we heat ammonium chloride, so that more of it can be dissolved in a solvent (water) and the temperature will not drop rapidly. (See also http://www.bbc.co.uk/schools/gcsebitesize/science/add_aqa_pre_2011/chemreac/energychangesrev1.shtml : Last Updated 14th March 2013.) What is being investigated? The idea of this investigation is to observe what happens when ammonium chloride is added in a test tube filled with a specific amount of water and heated. The next part of the investigation is to observe what happens when the product is allowed to cool. How is it being investigated? This experiment is being investigated by using a range of equipment. An electronic balance is being used to weigh the ammonium chloride and get an accurate result, and a burette to measure an accurate, 10mL of water which is added into a test tube with the ammonium chloride. An electric hot plate is then used to heat up this mixture, and dissolve it while in the process of heating. Next, a retort stand is used to cool down the mixture, so that you dont have to hold the test tube with your hand since it would be really, really hot! Finally, a digital thermometer is used to get a result of the temperature of when something happens in the test tube, when it is cooling down. These results of the experiment are written down and put into tables and graphs so that others may understand how the results were gathered using these equipment. How will the results be analysed? The results will be analysed by finding trends in the statistics that have been written down. These results will then be put into a table and graph. The table will be analysed to investigate if there are any results that dont fit in and if there is a reason why this result occurred during the experiment. The graph will be analysed by finding if there is a trend between the results on the graph (e.g. a constant) and how they match up. Next, the graph is analysed by checking if there is any inconsistencies or results that seem out of place. Finally, the graph is analysed by testing or checking the results to see if they are correct or incorrect. Materials solid ammonium chloride 2 retort stands 500 ml beaker Hand lens 250 mL distilled water burette burette holder large clean test tube electric hot plate spatula stirring rod digital thermometer 2 retort stand clamps heat mat electronic balance black card safety glasses Method 4gms of solid ammonium chloride was measured and the actual mass was recorded. The solid ammonium chloride was put into the large clean test tube. The burette was filled with distilled water till the level reached 10mL. This 10mL of water was added to the large clean test tube with the solid ammonium chloride. 300mL of hot water was added to the 500mL beaker. The beaker was placed on the electric hot plate. The beaker was heated up to boiling temperature and the large test tube was slowly placed inside with the water level in the beaker 3cm higher than the water level inside the test tube using the retort stand and clamp. The mixture in the test tube was gently stirred using the glass stirring rod until dissolved. The large test tube was removed from the beaker after the solid ammonium chloride dissolved and allowed to cool. The large test tube was stirred and watched using the hand lens and the black card to observe the first crystals form. The digital thermometer was used to measure the temperature of the first crystals forming. The mixture was then heated up again and using steps 7 -11 the process was repeated two more times to get the most accurate results of the crystals forming with 4gms of solid Ammonium Chloride. Steps 1 13 was repeated again using 5g, 6g and 7g of solid ammonium chloride. Discussion Trends The results in Table 1, 2 and Graph 1 all have one trend in common; as the temperature increases, the solubility of ammonium chloride increases. This trend shows that the results are reliable but not valid because graph 2, which is the accepted results, shows that the solubility curve of the two graphs do not match i.e. the values do not match but they follow the same pattern. Another trend in the results is the temperature, which shows that for the solubility of ammonium chloride, each gram that was tested roughly differs by 7 °C. This trend is neither reliable nor valid because they do not match graph 2 and the patterns in the graph are different. Saturated, Unsaturated or Supersaturated These results also indicate that this could be a saturated solution, unsaturated or a supersaturated solution because 4g of ammonium chloride dissolved in water at a temperature of 73.43 °C, though the 7g of ammonium chloride dissolved at a higher temperature of 94.56 °C meaning that it took longer to dissolve 7g than 4g. This, in turn, shows that if more ammonium chloride was added to the 7g of ammonium chloride it would have taken longer to dissolve and once it passed boiling temperature water would have evaporated till there was no solvent left and there would still be ammonium chloride. This would mean that 4, 5, 6 and 7g of ammonium chloride was an unsaturated solution. This is an error because it is completely different when compared to the result of graph 2. This error means that something occurred during the experiment which made the ammonium chloride at a higher temperature or simply a random error where the water was heated before the ammonium chloride was put into the beaker. This error has significantly changed the result as it has increased the temperature of dissolution when it should be a lot lower. Comparison (validity and reliability) Table 1 shows the 4, 5, 6 and 7 grams of ammonium chloride was tested three times to get the most accurate result. These three results were then divided to give an average. The average of the 6 and 7 grams of ammonium chloride in comparison to graph 2 is reliable because the solubility of ammonium chloride increases with the temperature. The average of the 4 and 5 grams of ammonium chloride in comparison to graph 2 could be reliable but the percentage of error is too high for this to be acceptable meaning that there was an error in the consistency of the experiment. Graph 1: Solubility of Ammonium Chloride shows the four averages of each test of ammonium chloride, with a trend-line that predicts the solubility of ammonium chloride between 0 °C and 100 °C. In addition the graph shows that when you keep adding more and more ammonium chloride the temperature for it to dissolve will increase, but only by a few degrees each time. Graph 2: Accepted Values Solubility of Ammonium Chloride are the accepted values of the solubility of ammonium chloride. In comparison to graph 1, both graphs have a curve, though graph 1 has more curve than graph 2, where the curve is very slight. Graph 1 and 2 do not match at all, meaning that there are errors and/or inconsistences in this experiment. Table 1, 2 and Graph Solubility of Ammonium Chloride all fit the theory that ammonium chloride dissolves in water. When we match up all the results in this experiment, they clearly do not match the accepted values. The accepted values are vastly different as graph 1 shows that 39.99 grams of ammonium chloride dissolves at 73.43 °C and graph 2 shows that 39.99 grams of ammonium chloride dissolves at roughly 28.12 °C. The results fit the theory because all four tests of ammonium chloride dissolved in water. The only factors that could have changed this outcome could have been the amount of substance in a solvent which is heated to a specific temperature. In the end graph 1 explains as the temperature increases, so will the amount of ammonium chloride that dissolves. Errors Possible errors that could have occurred during the experiment are: the solid didnt dissolve properly, temperature could have been wrong during the cooling down process, the recrystallization of the ammonium chloride in water was difficult to judge and malfunction of equipment could have caused errors. The reason why the solid might not have dissolved is because the temperature might not have been high enough or I didnt stir it enough. In the case of a random error the solid might not have dissolved but the eye might not have been able to see a very small particle even with a small magnifying glass. The reason the temperature could have been wrong is because when I stirred the mixture, the heat from the bottom of the test tube would have mixed with the cool temperature at the top of the test tube, meaning that when you saw the first crystals appearing the temperature could have still been changing. During the experiment the ammonium chloride solution from the first trials was recycle d to be used for further trials. This could have changed the purity of the ammonium chloride because it looked very different to the normal ammonium chloride. This could mean that while the weight did not present a problem, it may have not been completely dry which could affect the results. The malfunction of equipment could have occurred without my knowledge, such as the balance scale being inaccurate (e.g. the small empty cupcake cups on the scale did not balance at 0). Another malfunction could have occurred with the thermometer not working properly. The loss of ammonium chloride not dissolving could have lowered the solubility of the substance. The likelihood of the scale not working is very low and could be counted as a random error, but if it wasnt working the solubility of the substance would be lower than expected if there was less ammonium chloride and higher if there was more ammonium chloride. The recrystallization could have been the exact same as normal solid ammonium chloride or it could have weighted more or less. This would make the answer higher if the ammonium chloride weighed more than it should. Overall I believe the results and answers I recorded might have been a bit too high or even low, but I definitely know that they arent exact. One way to possibly improve the experiment is to use the exact amount of water and ammonium chloride to get a measurement of solubility (g/100mL). This would prove to be more accurate and would be better suited in a beaker, on top of the electric hot plate as the heat would be dispe rsed around the entire beaker. Further investigations that could be included into this experiment could be finding out the saturated solution of ammonium chloride at a specific temperature. This would be good because it is very likely that every group would get different results and have to explain more in their discussion about errors and if they think that their answer is valid or not. Improvements One way to possibly improve the experiment is to use the exact amount of water to get a measurement of solubility (100mL). This would prove to be more accurate and would be better suited in a beaker placed on an electric hot plate as the heat would be dispersed around the entire beaker. Further investigations that could be included could be finding out the saturated solution of ammonium chloride at a specific temperature. This would be good because it is very likely that every group would get different results and have to explain more in their discussion about errors and if they think that their answer is accurate or not. Conclusion In conclusion I discovered that 4, 5, 6 and 7 grams of solid ammonium chloride was soluble in water at different temperatures. The hypothesis that different amounts of ammonium chloride will dissolve in water at varying temperatures was answered. The results that I recorded werent valid because they did not match the accepted values, though the results were reliable in some cases as they did have a pattern and this pattern matched the accepted values.

Character of Cassio in Shakespeares Othello :: GCSE English Literature Coursework

The Character of Cassio in Othello Cassio is a an expert in strategic procedures and Othello is a Moor general in charge of the Venetian army. Cassio works by Othello's side as the army's lieutenant. Cassio though very useful in the army's duties was a simple-minded man, unconscious of his surroundings and his actions. He told Iago, "I have very poor and unhappy brains for drinking. I could well wish courtesy would invent some other custom of entertainment." Yet, shortly after this statement Cassio finds himself in a state in which he is so drunk he ends up fighting with a Cyprus official. Their naive ways lead them through a storm, it swept away Othello as Iago stood and watched. Othello was an honored and trusted general. His character reflected the honor and respect that was given to him. In scene one Barbantio and Othello confront each other about the couple's love and marriage. Even as her own father's trust grew distant Othello stood faithful as he told Barbantio, "My life upon her faith!" Even though Othello trusted his wife he began to suspect her faithfulness, as Othello's confidant Iago poisoned his mind with thoughts of infidelity. Othello's character reminds me of Edmond Dantes. There seems to be a similarity in the sense that, Edmond's mind was pure and innocent, he didn't even suspect his own companions of betraying him. Edmond's mind continued free of cruel intentions until his mind's capacity began to expand and he soon learned who his real enemies were. Edmond's character changed. His entire life was altered with the help of his mentor. Othello didn't have the assistance of a teacher but he had the assistance of Iago. Trust was the key to their downfalls. Othello trusted without protection. When he trusted someone he depended fully on that individual and committed his life to the faithfulness of that person. He wore no armor against the dishonesty of the cruel and knew how to fight only in the physical realm. "I know Iago thy honesty and love doth mince this matter..."When the revelation came upon Edmond's life he sought out revenge. In the same manner Othello's heart and mind was purely focused on his wi fe, Desdemona. When the poison in his mind began to settle, Othello's trust for Desdemona grew distant and his innocence began to fade. "For I know thou art' full of love and honesty and weigh'st thy words before thou gives't them breath.

Manufacturing System

A&A Toy Manufacturing Company Introduction Observed that the flow of information and logistics management between the client A&A Toy Manufacturing Company and its partners are not yet optimal, it is decided to recommend some information software to the client. As the company still adopting manual accounting system, it caused messy collection of financial and accounting data and human errors. The above problems would be burdens that affect managers’ decision making. In the hope of solving these problems an Accounting Information System (AIS) would be recommend to A&A Toy Manufacturing Company.The client has few employees, so it does not hold a well-structured system to management the employees. The following problems were observed: incomplete labor record, overlapped job duties and difficulties in calculating MPF. To improve human resource management of the client, a Human Resources Management System (HRIS) would be recommended. As the company is not using a well Logistic Infor mation System (LIS), the schedule of importing raw materials is messy; communication with customers is also poor. It is decided to recommend a Logistic Information System to tackle the problems stated above.The lack of Manufacturing Information System (MFIS) created difficulties like volume of inventory has not clearly stated and a scheduled operation is unable to run. A manufacturing information system can hopefully solve the difficulties. It is going to recommend Accounting Information System (AIS), Human Resources Management System (HRIS), Logistic Information System (LIS) and Manufacturing Information System (MFIS) for A&A Toy Manufacturing Company to improve their daily operation. Methods used to tackle the project Firstly, we drafted a project outline by brainstorming.Secondly, we discussed on the type of product that the manufacturing company produced. Thirdly, according to the nature of toy manufacturing company, we picked 4 information systems which benefit for the operatio n of the business. Based on the toy manufacturing company, we have to state what problems that a toy manufacturing company always faced. Lastly, we have to find the information on the selected 4 information systems that helps to tackle the above problems. In the process of doing the project, we faced a lot of difficulties. Then we sought help from our lecturer. So, the project can be finished on time.Our group found a lot of relevant information on the Internet, especially from wiki. Abundant of information are provided to be reference for our project. Logistic Information System (LIS) The logistics Information System is the system managing and controlling information handling processes optimally with respect to flow time and capacity, storage, distribution and presentation in such a way that it contributes to company results in concurrence with the costs of capturing like creation, searching and maintenance. The Logistics Information System is made up of the following information s ystems: * Sales Information System Purchasing Information System * Inventory Controlling * Shop Floor Information System * Plant Maintenance Information System * Quality Management Information System Function of Logistic Information System (LIS) * Correct information product at the accurate point of time * Correct format / quality * Create planning data * Provide an easy-to-use planning functions to support forecasting function * Plan, control, and monitor business events at different stages in the decision-making process * Flexible tools for collecting, aggregating and analyzing data from the operative applications Situation:A&A Toy Manufacturing Company has faced several problems nowadays. It has a poor management in logistic. First, the schedule of importing raw materials is messy. The company does not have a well-organized to manage the inventory stock. It is time-consuming and inefficient for the production line to spend large amount of time in making phone calls to confirm the arriving times of the raw materials. The arriving time is unclear and inaccurate. It is difficult for the company to have an accurate schedule to finish output in production stage under this situation.Secondly, the company does not have well-communicate with customers. They have not set up an accurate date and time to deliver finish goods to customers. It may have to delay or reschedule in the transaction. Therefore, customers always ask about this. It is ineffective and increases the cost to communicate with them. Overall, the logistic management of planning, organization and control of goods and material in A&A Toy Manufacturing Company are chaotic. Logistics information system is needed to solve problem that the company has. Application:Under the situation of the company, Logistics information system is important for achieving the efficiency and effectiveness. First, using information technology in Logistics information systems can well connect with consumers and suppliers. Time cost is decrease by communicate via Email or websites. The date and time for the raw material arrived and deliver product are more accurate than before. It reduces the redundancy of the transaction. Second, it reduces the requirements of inventory and human resources by enabling requirements planning.Logistics Data Warehouse is using for manage the inventory. It is clear and organizes for the company to update and group relevant data. Human resources reduce and bring effective to the company to make the decision. Third, delivery the finish goods to customers are effective by using logistics information system. The transportation of products improves because the company can plan the routes before they send the product to customers. The routes will be simplify and delivery conveniently. The transportation cost decrease.Fourth, it helps to enlarge scales of business through logistics information system. The manufacturing company is clearer idea about storage of raw materials and finis h goods, it is easily to order raw materials from suppliers or deliver finish goods to customers in a right time. They have a good management in inventory. It helps enlarge capacity of receiving order or storage. Software 1. Logistics Information Management System Features * Dispatch container * Invoicing * Driver and owner operator payments * By move or hourly * Driver profile * Trailer and Truck information Easy data search and retrieval: Invoices, containers, bookings, receipts, payments and vendors * Generate Reports: A/R / Invoicing / A/P / Truck / Trailer / Customer 2. Customs Intelligenceâ„ ¢ Features * Handles commercial and casual imports. * External document management * Client management and billing * Design your own reports Criteria| Logistics Information Management System (LIMS)| Customs Intelligenceâ„ ¢| Preference| User-friendly | Fair| Fair| Fair| Mobile Access| No| Yes| Customs Intelligenceâ„ ¢| Cost| CAD $1500| CAD $ 1699. 95| LIMS| Support after sales| Ye s| Yes| Fair|RFID| Yes| No| LIMS| By comparing the above criteria, Logistics Information Management System would be recommended. Firstly, both of the system is using graphical user interface (GUI), employees can easily pick up the new system. In case, encountered any problems both of the systems have supporting team to help the employees. The systems have a fair performance on the user-friendly aspect. Secondly, only Customs Intelligenceâ„ ¢ provided the mobile access function to keep check the inventories location, the predicted time of arriving. LIMS and only perform this function on computers.Thirdly, the RFID tags, only LIMS supported RFID tags to manage the inventory that in the warehouse. With RFID technology it can easily locate the location of the stocks in the warehouse and know the quantity of the stocks. It would be helpful to the business. To conclude, LIMS is cheaper and offered RFID technology, which is a useful tool. Although it does not preform mobile access funct ion, it is not a must to have it. Employees can also know the raw materials location and predicted arrival time from computers. It is enough to fix the messy of making phone calls all the time to know the rrival time. LIMS would be recommended as it can fix the company’s obstacles and have an RFID function which can further help the business to improve. Accounting Information System (FIS) Accounting Information System is a system of collection, storage and processing of financial and accounting data. An accounting Information system is a computer-based method. The resulting financial reports are useful for the internal management and external parties such as investor. It benefits the management to make decision. Functions of Financial Information System (FIS) Collects relevant financial and accounting data * Stores the financial and accounting data * Transfers the financial and accounting data into information, such as financial reports * Provides information to financial exe cutives * Provides timely financial information Situation After working with different functional units of A&A Toy Manufacturing Company for a while, I have observed that the company still adopting manual accounting system. This creates abundant of problems. Firstly, manual accounting system leads to the messy collection of financial and accounting data from different departments.With lots of missing data and the mistakes made by the accountants, it produces incomplete and inaccurate financial reports to the management. Secondly, manual accounting system leads to the wasting time in processing the data into information. After collection of data, the accountants have to record those transactions in to ledger by hand. It is really time consuming. Some of the final financial reports may be out of dated for decision making. Thirdly, the management make decision depends heavily on the financial reports produced by the accountants.As the incomplete and inaccurate provided to management, t he management will make a wrong decision. To conclude, manual accounting system produces incomplete, inaccurate and out of dated financial reports. The process of processing the financial and accounting data into information is messy and time consuming. Application Applying computerize accounting information system can help to improve the financial operation of the company. It brings several advantages to the company. Firstly, computerize accounting information system is automate and streamline reporting. The accountants just have to input the necessary data into the software.It will generate those requested accurate financial reports automatically by the accountants. Secondly, computerize accounting information system can generate financial reports automatically. So it is less time consuming. The accountants no need to record each transaction. The financial reports must be timely as the computerize system can generate reports in fast rate. Thirdly, computerize accounting informatio n system can generate timely, accurate, relevant, integrated financial. It can avoid human mistakes. Therefore, the management can make the correct decision for the business.Fourthly, computerize accounting information system can store the past data and reports. So the data and reports will be more organized and tidy. The probability of losing data will become low. To conclude, computerize accounting information system benefits the operation of business. It is less time consuming in generating timely, accurate, relevant, integrated financial reports in a short period. So, the financial and accounting data can be more organized and tidy. It monitors the cash flow closely in the company. Also, those qualified reports can truly reflect the profitability and liquidity of the company.The management can make the best decision. Software 1. Front Accounting Features: Advanced GST (VAT) handling * several GST (VAT) definitions with GST (VAT) groups * definition of GST (VAT) included * GST (V AT) can be selected on per customer, supplier or item level advanced GST (VAT) inquiry and report showing details and outputs/inputs. Full currency support * historical currency rates * Multi-currency bank accounts, customers and suppliers. 2. Intuit QuickBooks Features: * Allow multiple users to work off the same, up-to-date QuickBooks company file at the same time. Create professional-looking invoices and forms * Customize contact information fields in the Customer, Vendor, Employee Centers * Downloading transactions from financial institution Criteria| FrontAccounting| Intuit QuickBooks| Preference| User-friendly | Fair| Good| Intuit QuickBooks| Mobile Access| No| Online access(extra cost needed)| Intuit QuickBooks| Multiple user | No| Yes| Intuit QuickBooks| Cost| None| USD $199. 96| FrontAccounting| Updating| Yes| Yes| Fair| Support after sales| No| Yes (Extra Charges needed)| Intuit QuickBooks| By comparing the above criteria, Intuit QuickBooks would be recommended.Firstly, as A&A Toy Manufacturing Company is using manual accounting system, a user-friendly system is needed for employees start to pick up. Intuit QuickBooks is more user-friendly than FrontAccounting as it uses graphical user interface (GUI). Employees can get used to the new system soon. Moreover, if the employees encounter any problem, they can seek help from the Intuit hotline. While FrontAccounting just provided some common Q&A sections on the web, it is not specific even cannot help the employee. It would be a waste of human resource.Thirdly, as the managers or the owners may need to preform decision making outside the office, it would be better to have mobile accessing function for their convenience. Intuit QuickBooks provided this function while FrontAccounting does not. Although extra charges are needed for this function, managers could still have the right to consider use it or not. Fourthly, employees may need to access to the same document at one time, Intuit QuickBooks can suppo rt multiple users to work on the same time. It would be more convenient for the employee.Time would be wasted if the employees need to do the job one by one. Fifthly, both of the software have updating to introduce new functions of fix some bugs. They have fair performance on this criterion. Sixthly, FrontAccounting is free of charge, while Intuit QuickBooks cost almost USD$200, it is expensive to the A&A Toy Manufacturing Company. However good AIS could help the company a lot in saving cost and present accurate information for decision making purpose. As, the performance of Intuit QuickBooks is better than FrontAccounting and the cost is for permanent use, thus it is still worthy.To conclude, Intuit QuickBooks would be recommended to A&A Toy Manufacturing Company. Manufacturing Information System (MFIS) Manufacturing Information System is a computer-based system that works in conjunction with other functional information systems to support the firm’s management in solving pr oblems that relate to manufacturing the firm’s products. Manufacturing information provide services to support the manufacturing function, such as the inventory control and order processing for the company. The company may benefit by reducing the manufacturing costs, increasing products quality, and improving inventory decisions.Functions of Manufacturing Information System * Manages manufacturing resources * Enhances the availability of information * Collects and organizes manufacturing quality data in a straight-forward manner * Support inventory decision-making Situation After working with different functional units of A&A Toy Manufacturing Company, our team found that the company was operating with poor information and logistics management. Firstly, without a suitable manufacturing information system, the volume of inventory has not clearly stated during the daily operation.The staffs have to use extra time and manpower to check-up the inventory stock. In case, the staffs of production lines have to check that regularly, this may lower the efficiency since it wasted a lot of company’s resources. Secondly, the company cannot run a scheduled operation since the delivery of raw materials is not on-time. Moreover, the company does not have any concept on managing the manufacturing resources; as a result, the late delivery of raw materials may lead to poor shipment arrangement and customers-relation.Also, the above actions may delay the manufacturing processing, and lower the effectiveness. Application For the suitable manufacturing information system used by the A&A Toy Manufacturing Company, it may turns into conceptual and strategic tool for competitive advantage. Firstly, a manufacturing information system may help in organizing to resources’ data, such as the inventory stock. The system may help the company to keep track on the resources’ states and adjust the internal settings automatically. The usage of the report and control system of manufacturing information system is sophisticated.These kind of high-tech system can reduce the manpower wasted and duplicated use of resources; it may achieves maximum efficiency with minimum error. Secondly, the manufacturing information system includes managing the raw materials needed to be used. A good manufacturing information system can help in arranging the delivery of stocks and the processing tasks. Thus, the system may enhances the effectiveness in terms of ensure to do the processing tasks on-schedule and use the materials with high attainment. Software | Manufacturing Information System (Erp) Software|Company name| Softcore Infotech Private Limited| Features| * Auto Production Planning & Purchase Order prepared based on delivery date while considering available raw & finished stocks. * Production inspection * Final inspection of finished good| As A&A Toy Manufacturing Company doesn’t has a suitable manufacturing information system, the staffs have to us e extra time and manpower to check-up the inventory stock and lower the efficiency because of wasted a lot of company’s resources, we suggest the Manufacturing Information System (Erp) Software.Manufacturing Information System (Erp) Software offers auto Production Planning & Purchase Order prepared based on delivery date while considering available raw and finished stocks, it can help to reduce the manpower to check-up the inventory stocks. Besides, it also can help to enhance their shipment arrangement and customers-relation. Manufacturing Information System (Erp) Software also offers product and final goods inspection, to help A&A to control the quality of the raw and finished stocks. Human Resource Information System (HRIS)Human Resource Information System enables users to perform standard reporting from all Human Resource areas and process personal information, it provided information that helps decision makers define their own report quickly and efficiently. Functions of Human Resource Information System * Manage all employee information * Report and analysis of employee information * Developing online data bases of employee information * Benefits administration (enrollment, status changes, personal information updating) * Developing online searchable data bases of applicant resumes * Training record maintenance SituationA&A Toy Manufacturing Company with the small scale of operation and few of employees, all the information of labor only recorded by the application form individually so there is no complete labor record. This policy caused different management problems of the company: Firstly, without complete labor record, it is difficult for the company to specify labor’s strength and abilities. As a result, the supervisors cannot allocate the most suitable workers to carry out specific job duties. Secondly, as the company didn’t clearly give any instructions to labor that they have to do of their positions. So, their job duties may be overlapped.For instance, both salespersons and customer services need to answer lots of queries from their customers regarding the shipment arrangement, delivery status as well as warranty issues of their finished products. It will lower the efficiency of division of labor. Thirdly, with incomplete labor record, the company cannot recruit qualified candidates to satisfy the need of labor force in different departments. Fourthly, the calculation of Mandatory Provident Fund Schemes (MPF) of labor will be messy, the company cannot certainly calculate accumulate mandatory provident fund of each labor without complete labor record.Application of Human Resource Information System Firstly, Human Resource Information System helps the company to manage and record all employees’ information, Manager can clearly know all the information of labor including their strength, abilities and training record from the Human Resource Information System. Secondly, in order to give instructions to labor, they can have a clearer idea what to do of their positions; manager can offer different jobs according to their strength and abilities. Thus, it can avoid the problem of overlapping job duties. Thirdly, company can develop online database of employees’ information and nline searchable database of applicant resumes, so that the manager can review all the records easily. With online searchable database of applicant resumes, the company can easily search for the qualified candidates from received application form to satisfy the shortage of labor force in different departments. Fourthly, Human Resource Information System can be reconfigured to suit for different kinds of payroll, the system can record their payroll automatically with flexible payroll adjustment, the company can accurately calculate accumulate Mandatory Provident Fund of labor. Software Microsoft Office Access| BambooHR| Cost| * A one-time payment, $139. 99| * Monthly payment * Depends on the number of employees| User-friendly| * Involves graphical user interfaces(GUI)| * Involves tools (e. g. Power Edit)| Update frequency| * Constantly update| * Constantly update| Security| * Fair| * Fair| As a small-sized company, cost is one of the main concerns. To choose the proper system for the human resource information system, we prefer the Microsoft Office Access. Firstly, BambooHR costs monthly and the price is based on the number of labors.As a company with the small scale of operation, although A&A Toy Manufacturing Company only has a few of employees, monthly cost is a liability to them. MS Access only costs $139. 99 and for permanent use, it will reduce the burden of the company on the system. Secondly, MS Access and BambooHR are fair in the user-friendly section, but BambooHR involves some tools for the users to use easily, but they are only helpful in editing and filling the data in it after setting up the database. MS Access involves the graphical user interfaces (GUI), it can he lp the managers to set up the database of the employees easily.Besides, A&A is the company with the small scale of operation and few of employees, it may not have the senior programmers, MS Access offers many features for junior programmers, it is easy to use for A&A. Lastly, BambooHR and MS Access have fair performance on the update frequency and the security, two of these systems constantly update to meet customers’ needs and make the system more efficiency. Because of all the people are concerned about the security of the information systems, include the HRIS, two of these systems have a fair performance in security.For example, they use the firewall to protect the information in the database, and use some software to protect the information when they are in the backup process, such as SSL. To conclude, we suggest A&A Toy Manufacturing Company to use Microsoft Office Access as their human resource information system. Conclusion To conclude, we suggested four types of infor mation system for A&A Toy Manufacturing Company to use and help them to improve their existing state. We recommended Logistic Information System (LIS), Accounting Information System (AIS), Human Resource Information System (HRIS) and Manufacturing Information System(MFIS).Firstly, for Logistic Information System, we recommended A&A to use Logistics Information Management System (LIMS) to help to solve the exist problems such as reduces the requirements of inventory and human resources. LIMS supported RFID tags that can easily locate the location of the stocks in the warehouse and know the quantity of the stocks. Employees can also know the raw materials location and predicted arrival time from computers, it can help to decrease the human resource needed of the inventory management and making calls. Secondly, for Accounting Information System, we suggested Intuit QuickBooks.It uses graphical user interface (GUI) to help the employees to pick up the system easily. Besides, Intuit Quic kBooks can support multiple users to work on the same time, it would be more convenient for the employees to access to the same document at one time. Use computerize accounting information system instead of manual accounting system can reduce the probabilities of error and help the managers to make the best decisions to the company. Thirdly, for Human Resource Information System, we recommended Microsoft Office Access. Access only costs $139. 9 and for permanent use, it will reduce the burden of the company on the system. It also involves the graphical user interfaces (GUI), it can help the managers to set up the database of the employees easily. It can help the manager to manage the data of employees more convenient and efficiency. The managers can clearly know all the strength, abilities and training record of labor from the system and avoid the problem of overlapping job duties. Fourthly, for the manufacturing information system, we recommended Manufacturing Information System (E rp) Software. A&A can use this software to solve their problem.It offers auto Production Planning & Purchase Order prepared, it helps A&A to reduce the manpower to check-up the inventory stocks and enhance their shipment arrangement and enhance customers-relation. In addition, it also provides the product and final goods inspection, it can help the managers to control the quality of the raw and finished stocks. The above information systems with software can help to solve the difficulties. It helps to enhance the management in different departments to be optimal. Our team believes that those software can enhance the profitability in a foreseeable future.

Edwin Hubble Essay - 1469 Words

Edwin Powell Hubble: Great Astronomer of the 19th Century Twinkle, twinkle little star, How I wonder what you are! Up above the world so high, Like a diamond in the sky (Gardner 98). nbsp;nbsp;nbsp;nbsp;nbsp;Stars are a marvelous wonder to many people, that is why some people spend most of their lives wondering what is â€Å"above the world so high† (Gardner 98). These people study and map the little twinkling stars in order to get a better meaning of them; they are astronomers. Great astronomers like Edwin Hubble, Immanuel Kant, and William Huggins, never stopped valuing the beauty of the stars. While they developed great astronomical principals. One astronomer who fits this mold most is, Edwin Powell Hubble. Wondering about what was†¦show more content†¦As Hubble age, he was unable to use the telescope any more. He didn’t have the strength or energy to stay in the cage for long periods of time. So, he sent Sandage to carry out tasks for him. Everyday Sandage would be given coordinates or jobs by Hubble. When Sandage was done recording he data of his work, he would go back to Hubble and give him the results (Overbye 22). This shows how dev oted he was to his research, even if he was unable to handle the job due to old age he compromised. All of Hubble’s work and Sandage work was done on the 100-in telescope, yet Hubble was still able to find the Andromeda Nebulae’s distance for the Milky Way and study red shifts. While the 200-in. telescope was being built, Hubble asked if he could use the telescope for half of its available time. This shows his devotion because he wanted to use the telescope in order to further enhance his research (17). nbsp;nbsp;nbsp;nbsp;nbsp;Edwin Hubble’s curiosity about the universe started at youth and has grown. Without this, he would have no desire to study the stars or galaxies. Hubble’s interest in astronomy at the age of eight. On his eighth birthday party he spent the night with his grandfather star gazing (Freidman 16). When he was twelve years old he would ask his parents to seep outside and look at the stars at midnight with his friend Sam Shelton (18). His grandfather asked Hubble an astronomical question, and Hubble answered it so cleverly that hisShow MoreRelatedEdwin Hubble and His Dream969 Words   |  4 Pageseighty-nine who wanted to be an astronomer. That young man’s name is Edwin Hubble. The great Edwin Powell Hubble was the son on an insurance executive. He was born in Missouri. At the age of nine his residence changed from Missouri to Chicago. Growing up he enjoyed basketball and boxing. Hubble was a young man with the admiration to succeed in his education. He graduated from high school in nineteen o six and continued on to college. Hubble receive an academic scholarship at the University of Chicago.Read MoreEssay about Edwin Hubble Biography1056 Words   |  5 PagesEdwin P. Hubble was a ground-breaking American astronomer who revolutionized our knowledge of the universe and established the foundations for all of modern cosmology. At the beginning of the 20th century, most astronomers thought that our Universe was confined to the Milky Way Galaxy alone. However, Edwin Hubbles inspiration and perseverance in astronomical research proved otherwise. He discovered the existence of other galaxies and created a systematical classification for all galaxies. Addit ionallyRead MoreGeorge Lemaitre And The Big Bang Theory1296 Words   |  6 Pageswho truly developed the theory of the Big Bang (Edel Fletcher, 2017). 3. 1929, the American astronomer Edwin Hubble, the first to observe the distant of nebulae (DEFINE: (Nebulae) a cloud of interstellar gas and dust) and the first to prove that those nebulae were galaxies way beyond the milky way by measuring the distances (Edel Fletcher, 2017). 4. The 1930s, the interpretation of Edwin Hubble s observation, Georges Lemaitre had a thought that if time was rewound, there s got to be a pointRead More The Big Bang Theory Essay3469 Words   |  14 Pagesastronomer at the Mount Shapely Observatory was a scientist named Edwin Hubble (1889-1953) Hubble was also interested in studying the far reaches if the Milky Way and what lies beyond, if anything. Shapely and Hubble did not get along. One theory of the dislike is that Shapely posted some doggerel verses on a bulletin board about a woman that Hubble was maintaining at a hotel not far from the observatory. But in 1921, just 18 months after Hubble joined the staff at Mount Wilson, Shapely left. He moved toRead MoreThe Theory of General Relativity and The Expansion of the Universe: Albert Einstein and Edwin Hubble894 Words   |  4 PagesRussian Physicist, Alexander Friedman, was the first to believe that universe was expanding from initial singularity which is also known as the Big Bang. After Edwin Hubble stated his observation on the universe’s expansion in 1931, the end of the universe has been a subject that many scientist have investigated. In the late 1920’s before Edwin Hubble’s statement about his observation- to which after Einstein heard about the statement, Albert Einstein admitted that his cosmological constant was a stupidRead More Hubble Space Telescope Essay1737 Words   |  7 Pages According to a newsletter sent out by the National Aeronautics and Space Administration (NASA), the purpose of the Hubble Space Telescope was, and is, to gather light from cosmic objects so scientists can better understand the universe around us. Up until the deployment of the Hubble Space Telescope, all telescopes were Earth based and had the disadvantage of having to peer at the stars through the Earth’s atmosphere. The Earth’s atmosphere provides a large amount of distortion when viewing veryRead MoreEssay How was the Universe Created? The Big Bang Theory652 Words   |  3 Pages I will be writing about the Hubble space telescope, the COS ultraviolet one in particular. In 1608, A Dutch scientist called Hans Lippershey simply put two glass lenses in a narrow tube and changes the course of history. It wasn’t until Galileo directed the device towards the sky in 1609 that things got really thought-provoking. In 1889, an astronomer named Edwin Hubble was born, and he grew up to make some of the most important astronomy discoveries. Edwin Hubble created six space telescope instrumentsRead MoreThe Hubble Telescope and Its Discoveries Essay741 Words   |  3 PagesHubble Space Telescope and Significant Discoveries Funding was approved in 1977 for a Large Space Telescope in 1977 and in 1983 it was renamed Hubble Space Telescope in honor of astronomer Edwin P. Hubble who discovered evidence of an expanding universe and the existence of other galaxies. Work was completed in 1985 and it was launched and deployed from the Space Shuttle Discovery in April of 1990, 350 miles above earth. Since its deployment, there have been five services, each service to performRead MoreThe Development Of Telescope1641 Words   |  7 Pagesits lens took over a year to make, and it was able to observe far deep into the universe. The astronomer Edwin Hubble using this telescope discovered that some objects that people used to identified as nebula was actually galaxies outside the Milky Way: the universe does not entirely composed of the Milky Way as people used to believe; in fact, Milky Way is only a small part of it. While Hubble observed the red-shift of galaxies, he found that the velocity of separation of gala xies from the EarthRead MoreThe Big Bang Theory Essay857 Words   |  4 Pagesgenerations of bright minds. By 1930, other cosmologists, including Eddington, Willem de Sitter, and Einstein, had concluded that the static (non-evolving) models of the universe they had worked on for many years were unsatisfactory. Furthermore, Edwin Hubble, using the world’s largest telescope at Mt. Wilson in California, had shown that the distant galaxies all appeared to be receding from us at speeds proportional to their distances. In 1948, Gamow predicted that the radiation from the big bang

Example Of Financial Reimbursement - 1118 Words

It is not unheard of that in some study trials, the patient may receive financial reimbursement in order to minimise any out of pocket losses. Compensation may take various forms such as vouchers, petty cash, and free meals. My placement is no exception to this, as we do provide some aid to patients who either travel a certain distance to participate in the trial or provide a parking voucher. We also offer a meal to patients who were required to fast for pathology, as well as those whose study visits span for the entire day. My role is essential to ensure that we have enough petty cash to provide to our patients who partake in the trial. The sponsor will allocate how much compensation a patient is entitled to which has been previously†¦show more content†¦This did not really result in any hindrances to my fellow colleagues as we always have other backups to fall upon but it would have saved me some time by being capable to answer the cashier’s questions, however, the fault laid with me for not exploring all the rules of Monash Health. The good thing though is that from that point on, I learned where our limit is for claiming in our unit which enables me to perform my task without any hiccups. I guess what is a tad challenging is trying to stay on top of things such as having enough petty cash in our unit, as there is a communication barrier when my fellow colleagues take some petty cash and either don’t let me know so I can replace the amount missing or I get notified once there is a deficient amount. It is understandable though as a study coordinator they have a hundred things they are managing and notifying about how much petty cash is taken is not one of their top priorities. I have countered this issue by monitoring the funds twice a week to see if there is a sufficient amount for the patients that are planned over the week. However this is a short-term solution as once I’m gone it will become redundant, I am trying to figure out something so it is easy to complete until the future trials assistant joins the unit. Monitoring compensation may seem limited in transferring the skill or knowledge to other areas of the field; however, that is not entirely accurate. Even though study coordinators are involved in thisShow MoreRelatedThe Evolution Of Hospital System1118 Words   |  5 Pagesregulate the construction and operation of a hospital in the US. (BOOK) Alongside these professional and academic changes, the financial systems that the entire operation is based on had to evolve as well. Initially, hospitals in the US were voluntary and supported mostly by wealthy donors and some paying patients. These hospitals were not intended to profit or show financial solvency beyond daily operation. This posed a significant lack of consistency in providing care since the most of the governingRead MoreManagerial Accounting : Financial Data For Internal Process1215 Words   |  5 PagesManagerial accounting provides financial data for internal process which mainly uses by managers, executives and other governing boards of the organization (Buchbinder Shanks, 2012, p. 184). Using the managerial accounting data, I would need to utilize a few department and clinical personnel to get better understanding in analyzing the operating budget process of Happy Town Neurology. In order to start budgeting process I would refer some of the departments and personnel such as, account receivableRead MoreQuestions On Fiscal Management And Budgeting1435 Words   |  6 Pagesthey provide. The purpose of this paper is for the author to discuss and become familiar with fiscal management and budgeting, reimbursement issues, legal concepts of negligence, and legal considerations of evidence based practice of the acute care NP. Fiscal management and budgeting A NP with excellent knowledge of budgeting principles can make a difference in the financial health of an organization. One of the number one reasons companies and organizations fail is due to the lack of engaging inRead MoreManaging The Finances Of Health Care Systems899 Words   |  4 Pagesthis vast enterprise. The healthcare industry as a whole has changed dramatically since the evolution of the Affordable Care Act. The adoption of Medicare’s coding system for efficient billing coupled with the use of Electronic Medical Records are examples of the major transformation taking place within Health Care Systems, Incorporated. Moreover, the role of finance at Health Care Systems Inc. has received a new face to focus on basic functions such as Pooling of Resources, Revenue Collection as wellRead MoreFinancial Analysis : Financial Management1125 Words   |  5 Pageswell as lending and borrowing needs in an organization. Managerial accounting provides financial data for an internal process which is mainly used by managers, executives and other governing boards of the organization (Buchbinder Shanks, 2012, p. 184). Using the managerial accounting data, I utilize Chief Financial Officer (CFO) (is the one who is responsible for the entire financial management function of the organization) department, the controller (who is responsible for the accountingRead MoreEssay On Hospital Revenue722 Words   |  3 PagesPatient Satisfaction Impacts Revenue The purpose of this paper is to discuss how patient satisfaction impacts hospital revenue. As hospital reimbursements are now closely entwined with patient satisfaction, a patient’s experience affects hospital revenue. With more transparent platforms such as patient experience survey results being publicly available and having a new national value-based purchasing system in effect, it is imperative more than ever to comprehend how such metrics impact a patient’sRead MoreFinancing The Failing U.s. Healthcare System1515 Words   |  7 PagesThe method of reimbursement determines which party will bear the greater financial risk and can lead to an excess supply of medical services that drive up prices and provide no additional benefit to individual consumers because of producer and consumer moral hazard. To maintain a sound healthcare market government regulation is required in the current U.S. healthcare system because it would otherwise fail. The following paragraphs will discuss the methods and effects of reimbursement in the U.S. healthcareRead MoreHealthcare System The Role Of Finance1584 Words   |  7 Pagesfinance is an important aspect in healthcare. In the financial role of healthcare it involves handling operations such as negotiating contracts, making cash available for expenses such as payroll and cover cost for unexpected expenses. The role of finances also makes it capable for leadership to better make plans for the future, when finances are in order organizations can better equipped to make decisions such as is the organization financial able to expand test or treatments and are they able toRead MoreThe Centers For Medicare And Medicaid s ( Cms ) Value Based Purchasing Program1299 Words   |  6 PagesThe Centers for Medicare and Medicaid’s (CMS) Value-Based Purchasing program (VBP) was implemented in 2012. This program adjusts what CMS will pay hospitals based on the quality of care hospitals give patients. The value-based purchasing is a financial incentive for hospitals to get and maintain higher patient satisfaction scores. Patients recognize discharge as a distinct episode in their care but, it also can skew their perceptions of the entire hospitalization. Educating, empowering and engagingRead MoreThe Patient Protection And Affordable Care Act804 Words   |  4 PagesPatient Protection and Affordable Care Act (PPACA), health care has been faced with complex issues. Health Care providers are challenged with extreme cost pressures making it difficult to maintain their financial viability. It is important they uphold high ethical standards when making financial decisions (Zelman, McCue, Glick and Thomas, 2014). The United States has spent more on healthcare than any other country. In the first quarter of 2014 healthcare spending rose 9.9%, the largest quarterly

Renewable Energy In Argentina - 706 Words

It is about time that Argentina stepped up to the plate. As the country’s gas reserves have continued to dry up and both the economy and the demand for energy have kept on growing, Argentina’s energy sector has fallen into decline. In 2011, for the first time in 27 years, the country became a net importer of energy, and landed itself a US$9.4bn import bill for oil and gas. It is clear that the government needs to revisit many of its energy strategies, and as the country’s demand for electricity is estimated to keep growing at an annual increase of 6% a year, the pressure is mounting. So far, all of Argentina’s renewable energy sources have been left unexploited. According to advisory group Ernst Young, wind energy sources in Patagonia†¦show more content†¦It is believed that the current transmission infrastructure is sufficient to support the build-out of the successful GENREN tenders; however, project development beyond this level will require significant investment in the transmission infrastructure. Wind Argentina has abundant unexploited wind resources, especially in the southern Patagonia region where capacity factors are well in excess of 45%. Current installed capacity stands at 32 MW, though the Government is targeting 1.2 GW by 2016. Despite ongoing difficulties with project financing and low electricity prices, certain provinces have introduced local tax incentives. For example, Chubut, in north Patagonia, has approved legislation removing 100% of taxes on gross income from wind power in the first 5 years of operation, reducing to 50% in years 6 to 10. The province hopes such incentives will spur the build-out of an estimated 2.2-GW pipeline. Solar Argentina’s eastern plains and north western regions are ideal for solar PV development. However, only 10 MW of solar has been installed in Argentina to date, making it a huge untapped resource. The Government has set a target of generating 3.3 GW of solar power by 2020. Biomass Argentina has historically focused on biofuel development rather than biomass, resulting in minimal installed capacity to date. However, itShow MoreRelatedThe Energy, Clean Renewable Energy902 Words   |  4 Pagesseems to be right within humanities grasp? The answer is energy, clean renewable energy. With the increasing advances in modern society, as does the requirement of more energy becomes necessary. Currently humanity are facing a dilemma where humans are burning threw nonrenewable resources such as fossil fuels, coal, natural gas, and oil faster than they can be replenished from a set stock. Civilization also faces problems stemming from harmful energy sources such as nuclear, and fossil fuels, etc. wereRead MoreRenewable Transport Fuels Obligation For The Demand Of Petroleum Based Fuels1231 Words   |  5 Pagesequivalent (mtoe) of energy was used in transportation which is nearly 40% of all of the energy consumed (DECC, 2015, p. 8). â€Å"Progressive depletion of conventi onal fossil fuels with increasing energy consumption and GHG emissions have led to a move towards alternative, renewable, sustainable, efficient and cost-effective energy sources with lesser emissions† (Nigama, P, S., Singhb, A., 2011). In order to reduce carbon emissions from vehicles the UK parliament enacted the Renewable Transport Fuels ObligationRead MoreEnvironmental Issues : The United States And Uruguay Essay1147 Words   |  5 Pagesthe United States to Uruguay, a small yet more effective country when it comes to utilizing our renewable resources. The United States is the largest consumer of nonrenewable resources in the world. In the United States the primary source of energy comes from 3 different resources. These resources are petroleum, natural gas and coal. The three of these resources make up over 90 percent of the energy consumption of nonrenewable resources in the United States. These nonrenewable resources are consideredRead MoreFossil Fuels Is A Nonrenewable Resource1622 Words   |  7 Pagessubstances that puts marine life in hazards and lastly, burning coal releases acid rain. Solar Power Solar Power is a renewable resource that is found in Los Angeles, California, San Diego, California and Phoenix, Arizona. Solar power is created from the heat of the sun, which is then transferred into electricity that can heat air and water. The most reliable source of solar energy is photo voltaic solar panels. These types of solar panels absorb the sun’s rays to convert it to electricity. TheseRead MoreBusiness Cultures And Values Are Shared Between Mature And Emerging Market Partners1264 Words   |  6 Pagesadvertisement or other means of marketing. Technological Changes Brazil has set standards in the technological field of clean energy. This clean energy is derived through endless hours of research synergies between special search agencies and the government. They understand the importance of invest in renewable energy sources. One such program is wind energy. They will use wind and solar energy to power lamppost, these lamppost will remain lite an average of 7 days once fully charges. They also plan on harassingRead MoreThe Sustainability Of Biofuels Throughout Latin America1223 Words   |  5 Pageseventually lands at the conclusion and advances a few suggestions. Keywords: sustainability, biofuel, benefits, barriers 1. Introduction 1.1. Overview of bio fuel in LA . Latin America (LA) has abundance of renewable energy sources which remarkably could provide energy solutions to worldwide energy needs. For biofuel generation, Latin America has a blend of numerous favorable circumstances, for example, great soil, appropriate atmosphere, accessible land and low work costs. Brazil is one of only a handfulRead MoreNuclear Energy is a Dangerous Distraction1172 Words   |  5 Pagesenvironmentalists are concerned with preserving the planet Earth by using different forms of energy resources. The interest of scientists and environmentalists motivate them to wonder about the Nuclear energy as one of the most destructive energy resources of the world. For most, it is compulsory to stress that the attempts to understand the uses of nuclear energy are mainly based on assumptions. The genuine uses of nuclear energy, however, are still not applicable. Firstly, this is due to the high cost requiredRead MoreEnvironmental Goods Agreement Essay858 Words   |  4 Pagesthat wanted to eliminate tariffs on environment-related products. The participants, just to name a few, included USA, EU, Canada, a nd Korea. These products helped achieve environmental and climate protection, such as creating pure and renewable energy, improving energy efficiency, resource efficiency, reducing air pollution and waste, and monitoring the environment’s quality. Roberto Azevedo, the Director-General said: â€Å"This is not the usual kind of trade agreement as it is focused on protecting aRead MoreOil And Natural Gas Is An Indispensable Part Of Human Beings1091 Words   |  5 Pagesconsider the use of non-renewable, environmental damage of oil and the social costs, people are over-rely on oil and uncontrolled product and consume of oil has caused too many problems, for example, economic problems, environmental populations and military problems. Oil and water resources occupies an extremely important position in the national economy, and is indispensable for human survival and development of social resources. Oil and natural gas is an important energy resource. In modern civilizedRead MoreWhat Is Sustainable Development?1293 Words   |  6 PagesSustainable development most commonly refers to the use and reuse of renewable energy sources. This creates a system that is â€Å"sustainable† and can keep going on into the foreseeable future. The world needs to be considered as a system since what happens in one part of the world can have an effect on a different continent. For example, air pollution in North America is known to affect the quality of air in Asia, and pesticides sprayed in Argentina can harm fish populations in Australia. Therefore sustainable

King henry 8th Essay Example For Students

King henry 8th Essay World HistoryOn June 28, 1491 Henry the VIII of England was born. This young man will form his own church. He will succeed to the throne in 1509. He will also marry six women! Something good will happen when he is king, he will unite England and Wales and will also do some bad things like executing people who would not follow his rules. In 1539, the Act of Supremacy declared Henry to be the head of the Church of England. King Henry the VIII of England had a good side and a bad side. Though popular with the people of England, and also very talented, he had many bad times and many good times for himself. Henry was not only selfish but also, handsome and had a hearty personality. He was also a gifted scholar, linguist, composer, and a musician. He was talented at many sports and was also good with the ladies. Henry was the second son and the third child of his father. Henry the VIII died in 1509. The only reason Henry would become king is because of his brothers, Arthur, death in April of 1502. Soon after that, Henry would marry his first wife, his brother (Arthurs) widow, Catherine of Aragon. Many wives would follow after her. During most of his early reign, Henry relied on Thomas Cardinal Wosley to do much of the political and religious activities. Henry soon got tired of his marriage with Catherine of Aragon, so he decides that he doesnt want to be married to her anymore. One of his underlying reasons is that Catherine fails to bare a male heir. He tells Thomas Wosley to talk to the pope so he can divorce Catherine. But, Cardinal Wosley wasnt able to convince the Pope. Thus, in 1529 Henry took Wesleys authority away from him. Henry then appointed Sir Thomas More. Through Thomas Cramner, Henry got the divorce that he wanted with Catherine of Aragon and then married Anne Boleyn. Cramner now the archbishop of Canterbury, made Henrys marriage with Catherine void and his marriage with Anne valid. This made the Pope furious. So in 1534, King Henry had the parliament pass a law saying that the king, not the Pope, would from now on be the supreme head of the Church of England. Thus, . The entry if England into the Reformation movement was an accident, the result of a side issue the desire of King Henry VIII to get an annulment of the marriage between himself and his legitimate wife Catherine. Since Henry was now in charge of the Church , he was going to make some changes. He had all the bibles translated into English. He then had all the people take an oath for this law. But Sir Thomas More, Cardinal, and John Fisher wouldnt accept the religious supremacy of the English monarch, so they were then executed. These changes gradually led to the formation of the Church of England In 1536, Henry accused his second wife, Anne Boleyn of adultery. Then, Henry executed her. A few days after that, he married a young woman by the name of Jane Seymour. Jane Seymour, Henrys third wife, was the mother of Henrys only legitimate son. Jane Seymour died after bearing the child. Edward the VI was Henrys only legitimate son. A couple of years after Jane Seymour had died, Henry decided to marry once again. He married a German princess by the name of Anne of Cleaves. In 1540, Henry was told that Anne of Cleaves was a beautiful and pretty young woman. .u306e9273abd2529ec05e09bb68bdcc45 , .u306e9273abd2529ec05e09bb68bdcc45 .postImageUrl , .u306e9273abd2529ec05e09bb68bdcc45 .centered-text-area { min-height: 80px; position: relative; } .u306e9273abd2529ec05e09bb68bdcc45 , .u306e9273abd2529ec05e09bb68bdcc45:hover , .u306e9273abd2529ec05e09bb68bdcc45:visited , .u306e9273abd2529ec05e09bb68bdcc45:active { border:0!important; } .u306e9273abd2529ec05e09bb68bdcc45 .clearfix:after { content: ""; display: table; clear: both; } .u306e9273abd2529ec05e09bb68bdcc45 { display: block; transition: background-color 250ms; webkit-transition: background-color 250ms; width: 100%; opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; background-color: #95A5A6; } .u306e9273abd2529ec05e09bb68bdcc45:active , .u306e9273abd2529ec05e09bb68bdcc45:hover { opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; background-color: #2C3E50; } .u306e9273abd2529ec05e09bb68bdcc45 .centered-text-area { width: 100%; position: relative ; } .u306e9273abd2529ec05e09bb68bdcc45 .ctaText { border-bottom: 0 solid #fff; color: #2980B9; font-size: 16px; font-weight: bold; margin: 0; padding: 0; text-decoration: underline; } .u306e9273abd2529ec05e09bb68bdcc45 .postTitle { color: #FFFFFF; font-size: 16px; font-weight: 600; margin: 0; padding: 0; width: 100%; } .u306e9273abd2529ec05e09bb68bdcc45 .ctaButton { background-color: #7F8C8D!important; color: #2980B9; border: none; border-radius: 3px; box-shadow: none; font-size: 14px; font-weight: bold; line-height: 26px; moz-border-radius: 3px; text-align: center; text-decoration: none; text-shadow: none; width: 80px; min-height: 80px; background: url(https://artscolumbia.org/wp-content/plugins/intelly-related-posts/assets/images/simple-arrow.png)no-repeat; position: absolute; right: 0; top: 0; } .u306e9273abd2529ec05e09bb68bdcc45:hover .ctaButton { background-color: #34495E!important; } .u306e9273abd2529ec05e09bb68bdcc45 .centered-text { display: table; height: 80px; padding-left : 18px; top: 0; } .u306e9273abd2529ec05e09bb68bdcc45 .u306e9273abd2529ec05e09bb68bdcc45-content { display: table-cell; margin: 0; padding: 0; padding-right: 108px; position: relative; vertical-align: middle; width: 100%; } .u306e9273abd2529ec05e09bb68bdcc45:after { content: ""; display: block; clear: both; } READ: Scopes Monkey Trail Essay However, when Henry finally saw her, he found her to be quite unatractive. Therefore, he then divorced Anne of Cleaves and then beheaded Thomas Cromwell for having tricked him. Being unloyal to God as much as Henry possibly could, he made the decision to marry his fifth wife by the name of Catherine Howard. Catherine Howard was then summarily executed in 1542 for being unchaste prior to marriage with Henry the VIII and for committing adultery. Henry had only one more wife to go. In 1543 Henry married his sixth and final wife, Catherine Parr. Catherine then survived Henry and then lived on to marry fourth husband. In 1536, during Henry the VIIIs reign, England and Wales were finally united as one country. During the 1280s, after Edward the I had conquer Wales, the Welsh people had revolted several times against the English people, due to Edwards conquer. But, the Welsh people finally accepted the idea of unity with the English people. In the acts of 1536 and 1543, Henry joined both Wales and England under one system of government. When Ireland was made a nation or kingdom in 1541, King Henry then became the king of Ireland. Henry, now the king, had many wars with Scotland and France. During 1542 King Henrys troops defeated the Scots at Solway Moss. In 1544, Henrys troops also captured Boulogne-sun-Mer from the French, and then a peace treaty was made when Henry received an indemnity from France in 1546. Henrys wars with Scotland remained indecisive in spite of some small victories. Though he opposed the Reformation, his very own creation of a national church started the real beginning of the English Reformation. On January 28 1547, Henry the VIII of England died in the city of London. Henry was buried in Saint Georges Chapel in the famous Windsor Castle. During the reign of Edward the VI, Henry the VIIIs only legitimate son, the parliament passed many more church reforms. But, then in 1553, Edwards half sister, Mary, the daughter of Catherine of Aragon, reestablished Catholicism as the state religion. Even though Henry altered the Church, he did not even wish to introduce Protestant doctrine. Those people who refused to accept the Church of England and its teachings were executed. On 30 July, 1540, of six victims who were dragged to Smithfield, three were reformers burnt for heretical doctrine, and the other three Catholics, hanged and quartered for denying the kings supremacy. Of all the numerous miserable beings whom Henry sent to execution, Cromwell, perhaps, is the only one who fully deserved his fate. Looking at the last fifteen years of Henrys life, it is hard to find one single feature which does not evoke repulsion, and the attempts made by some writers to whitewash his misdeeds only give proof of the extraordinary prejudice with which they approach the subject. The only important religious changes made during his reign were the licensing of an English translation of the Bible, the issuance of Cramners litany and the translation of English of certain parts of the traditional service. In conclusion, Henry the VIII of England was not only a talented and rich fellow, but he was also disloyal to God and made many mistakes. Making the Church of England was probably his greatest achievement as the King of England. Forcing people to follow a certain religion and do what he told them to do was one of his lowest achievements. Apart form the two queens with their accomplices, Henry VIIIs list of kills compromised cardinals, bishops, abbots, priests, scholars, peers, knights, middle-class citizens and many women of gentle birth: the sum total ran into hundreds. (world hisory book of 1988)Words/ Pages : 1,209 / 24